Andersen Offset Ranch Hitch Adapter
Welcome to the nation's diesel performance parts experts where we will settle for nothing less than the best. Buy from OC DIESEL and receive excellent customer service on quality components at the lowest price online. Purchase the Andersen Offset Ranch Hitch Adapter now at this low price for a limited time only.
Andersen Offset Ranch Hitch Adapter Product Features
- Fits Standard 2 5/16" Gooseneck Ball Hitch
- 3" Total Vertical Adjustment
- 11 3/4" - 14 3/4" Height Adjustment
- 24,000 lbs Trailer GTWR and 6,000 lbs. Tongue Weight
- Kit Includes Hardware for Attachment to 5th Wheel Trailer
- Funnel Shaped Coupler for Easy Hookup
- Exclusive Remote Cable Operation
- Meets V19 Certifications
- Slide Hammer Tool (Sold Separately)
- Adapter Lock available, part # AMI 3251
- Not Recommended for Cushioned Pin Box
- Easy Installation
Please Note:
For Long Bed trucks a Standard Ranch Hitch Adapter will be needed. Please see OC Diesel part #
AMI 3100
If you already own a Andersen Offset Ranch Hitch Adapter and need the Straight Hitch Adapter please see OC Diesel part #
AMI 3101
Make Towing a 5th Wheel Easy with a Andersen Ranch Hitch
This 8" Offset Ranch Hitch Adapter. Built for short bed trucks used for towing fifth wheel trailers. The Ranch Hitch Adapter is a great solution to converting your fifth wheel trailer to a gooseneck hitch. If you want to pull a 5th wheel trailer but don't want to lose your truck bed to a bulky 5th wheel hitch, Andersen Mfg. has the solution for you! You can use any standard gooseneck hitch in your truck bed with their Ranch Hitch Adapter attached to the trailer. The Ranch Hitch Adapter is the only 5th wheel to gooseneck adapter on the market that meets V19 Certification. V19 is the strongest safety certification available for gooseneck connections. It can pull a trailer weighing up to 24,000 lbs with 6,000 lbs tongue weight.
The Ranch Hitch Adapter is very easy to use. Most gooseneck receivers require you to get into the bed of your truck to latch the coupler; not so with the Ranch Hitch Adapter. The remote cable mechanism allows you to engage and release the coupler while standing on the ground outside your pickup. The bell shaped receiver allows for the hitch ball and adapter to be as much as 3 inch off center, and still slide into place correctly. With 3 inch of vertical adjustment you can be sure your trailer matches up level with your truck.
Andersen Mfg. now offers the adapter with an 8 inch offset for use with short bed trucks. The extra 8 inch gives you more room between the over-hang of your trailer and the cab of your truck allowing you to turn more easily. The offset version includes all the same benefits of the straight version and is also rated for 24,000 lbs and 6,000 lbs tongue weight.
Andersen Mfg.'s Ranch Hitch Adapter is quick and easy to install. The installation is simple and takes roughly an hour to complete. To see if the adapter will fit your 5th wheel, do the following: Back your truck into position to hook up your 5th wheel.Measure from the
pin plate (the bottom of the pin box) down to the top of the ball in the bed of your truck. When the adapter is fully compressed that measurement is 11 3/4 inch. It has 3 inch of adjustment, so when it is fully extended that measurement will be 14 3/4 inch. You should have 5 inch or 6 inch of clearance between the over-hang of the trailer and the sideboards of your truck, keeping in mind your 5th wheel should be level for traveling.
Buy the Andersen Offset Ranch Hitch Adapter from OC DIESEL and Save!
Call today and ask for one of our Andersen Offset Ranch Hitch Adapter Experts! OC DIESEL settles for nothing less than the best customer service with unbeatable prices on the AMI 3139 (Andersen Offset Ranch Hitch Adapter). Call (714) 848-2170 now.
