25002 Edge Evolution Programmer with Monitor for GM Duramax

Free Live Chat Software

Payment Processing

OCDiesel.com
Orange County Diesel, Inc.
17242 Gothard Street
Suite A&B
Huntington Beach, CA 92647

Toll-Free (888) OC DIESEL

Edge Products Evolution Programmer for GM Duramax

25002 Edge Evolution Programmer with Monitor for GM Duramax

For illustrative purpose only.

List Price: $599.00
Our Price: $479.20
You save $119.80!

Low Price Guarantee

Live Customer Service

Diesel Product Experts

Part Number: EP25002

Qty:

Description

Extended Information

Pay it Forward

Product Features

Evolution Programmer

GM Duramax 6.6L (2006-2007)

The Evolution for diesel pickup trucks is the first standalone programmer to display EGTs. The Evolution re-tunes the truck to maximize performance, fuel economy and monitoring capabilities. Plus, it ships with a custom-designed pod to make the Evolution factory installed.

KEY FEATURES

FIRST PROGRAMMER TO READ AND DISPLAY EGTs, probe included
Provides in-cab display to monitor vital engine functions
Additional 100 HP and 210 ft. lbs of torque
Three power levels with special mileage tune for improved fuel economy
Ships with a custom designed pod
Internet updateable (cable included)
Displays and clear diagnostic trouble codes
Adjustable LED backlight color
Displays Alerts and Records such as RPM, MPH and EGT
Datalogs vital engine information
Simple installation

ADVANCED TUNING

Speedometer correction (corrects for trucks tire size)
Adjustable speed limiter

PERFORMANCE TESTING

0-60 and Quarter mile performance tests with the drag strip Christmas tree lighting and reaction times

DATA STREAM

Records 5 parameters for up to 60 seconds

PIDS
The Evolution allows the user to view up to 4 PIDs at one time. There are 24 different PIDs to choose from. Below is a list and description of each:

RPM (Revolutions Per Minute) - Engine speed.
MPH (Miles Per Hour) - Note: Dash display may be +/-3 MPH off from the digital display due to mechanical differences in the spring, etc. used to control the gauge.
ECT (Engine Coolant Temperature) - Degrees F.
LOAD (Engine Load) - Calculated engine Load
GEAR (Current Gear) - Current gear.
TFT (Trans Fluid Temperature) - Degrees F.
BST (Boost Press) - PSI
MAF (Mass Air Flow) - Grams Per Second
IAT (Intake Air Temperature in manifold) - Degrees F.
DFRP (Desired Fuel Rail Pressure) - PSI
AFRP (Actual Fuel Rail Pressure) - PSI
OSS (Output Shaft Speed) - RPM
MAP (Manifold absolute Pressure) - kPa
MIT (Main Injection Timing) - Degrees
TQ (Engine Torque) - ft/lbs
BAT (Battery voltage) - Volts
CFR (Calculated Fuel Rate) - mm3
VPOS (Turbo Vane Position) - %
APP (Accelerator Pedal Position) - %
IATT (Intake Air Temperature in intake tube) - Degrees F
BARO (Barometric Pressure) - kPa
FTMP (Fuel Temperature) - Degrees F
DIDL (Desired Idle) - RPM
EGT (Exhaust Gas Temperature) - Degrees F

The following power gains are representative of an actual test vehicle. These gains were measured on a SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power delivered to the rear wheels of the test truck. The only modification made to the test truck was the addition of the Edge Evolution module. Power gains may vary based on vehicle and geographical location.

Level 0: Stock
Level 1: 30 Horsepower - 60 Foot Pounds of Torque
Level 2: 60 Horsepower - 135 Foot Pounds of Torque
Level 3: 85 Horsepower - 185 Foot Pounds of Torque
Level 4: 100 Horsepower - 220 Foot Pounds of Torque

Please Note: These products will not work on GM 4500/5500 or larger series trucks, it will only work on the 2500HD and the 3500 models.

Not legal for sale or use in California on pollution-controlled motor vehicles.

Please Note: The Evolution programmer has the ability to remove/adjust your vehicles factory speed limiter. Improper use of this feature could result in a serious or fatal accident. Removal/adjustment of the factory speed limiter is intended for use in a closed circuit, legally sanctioned racing environment. Even if racing in a legally sanctioned racing environment, it is your responsibility to ensure your tires and other vehicle components are rated to travel at increased speeds with the speed limiter removed/adjusted. If you remove/adjust the speed limiter during highway driving, it is your responsibility to obey all driving laws, including adhering to posted speed limits.

Removing/adjusting the speed limiter for purposes inconsistent with the products intended function, as stated herein, is a violation of the product�s intended use and invalidates the product's warranty. Edge Products is not responsible for or liable for the consequences of improper product use.

Check This Out...

Boost Bunny Baby Rib Camisole - Black

Sale Price: $8.00

2010 Boost Bunny Calendar

Sale Price: $7.00

Orange County Diesel T Shirt in White

Sale Price: $10.00

Orange County Diesel T Shirt in Black

Sale Price: $10.00

Edge Insight Thermocouple - EGT Probe

Our Price: $79.99

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Vehicle > GM Duramax 6.6L 06-07 LLY/LBZ
Diesel Chips & Tuners > Programmers & Tuners > Programmers & Tuners With Gauge Monitor
Diesel Chips & Tuners > Programmers & Tuners
Edge Products
Diesel Chips & Tuners
Vehicle

	S&B System Replacement Reusable Air Filter for Ford Powerstroke $55.00
	Silverline 4 inch 409 Stainless Dual Turbo Back Exhaust System w/Tips (Off-Road) for GM Duramax $779.55
	Kelderman 7-8in Lift Kit � Rear (Short Bed) $3,249.99
	Edge Products Juice with Attitude Monitor for GM Duramax $740.00
	S&B Air Filter Oil - 1 Gallon Refill Bottle (Blue) $20.94
	Hypertech Max Energy E-CON Economy Power Programmer for Ford Powerstroke $329.99
	Airaid Cold Air Intake System Type CAD (MXP Series) w/ Intake Tube for Dodge Cummins $345.90
	BD Diesel Cool-It Intercoolers for Dodge Cummins $1,179.90

www.ocdiesel.com

Evolution Programmer

GM Duramax 6.6L (2006-2007)